Testing the alternator in your 2.2L Toyota Camry, to see if it is bad (or not), can be accurately done with just a multimeter.
Not only that, testing it is easy and fast and in this tutorial, I'll show you how.
Contents of this tutorial:
You can find this tutorial in Spanish here: Cómo Probar El Alternador (1996-2000 2.2L Toyota Camry) (at: autotecnico-online.com).
APPLIES TO: This tutorial applies to the following vehicles:
- 2.2L Toyota Camry: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.
Symptoms Of A Bad Alternator
The alternator in your 1992–2001 2.2L Toyota Camry provides the electrical current your car needs once the engine is running and charges the battery so it's ready to crank the next time you start the car.
When the alternator fails, you'll typically notice one or more of these symptoms:
- Charge light on: The charge light (or battery light) lights up on your dashboard, signaling an issue with the charging system.
- Dim headlights: While driving at night, the headlights appear unusually dim—a clear sign the alternator isn't providing enough power.
- Engine won't crank but starts with a jump: The engine won't crank on its own, but with a jump-start, your Camry fires right up, suggesting the alternator isn't recharging the battery.
- Battery keeps dying: The battery frequently requires recharging or jump-starting. Even after starting, the car only runs for a short while before stalling again.
- Lights flicker or dim intermittently: The headlights or interior lights dim and flicker while driving, indicating inconsistent alternator output.
- Unusual noises: A failing alternator may produce whining, grinding, or squealing noises due to worn bearings or internal issues.
- Weak or dead battery: The battery becomes weak or completely drains, even if it's relatively new or has been recently charged.
If you notice any of these symptoms, it's time to test the alternator and determine if it's the source of the problem.
Where To Buy A Brand New Alternator
You can buy a brand new alternator for what it will cost you to buy a rebuilt one at your local auto parts store.
Check out the links below and shop/compare and see for yourself:
Not sure if the above alternator and alternator belt fit you particular 2.2L Toyota Camry? Don't worry, once you get to the site, they'll make sure the parts fit and if they don't they'll ask you about your Camry's specifics to find you the right parts.
TEST 1: Battery Voltage Test With Engine Running
To begin our alternator diagnostic, we'll start by checking the battery's voltage (with a multimeter) while the engine is running.
This simple test will tell us whether the alternator is functioning and charging the battery or if it's failing to do so.
Here's what to look for:
- Not Charging: If the alternator IS NOT working, the battery voltage will measure under 12.5 Volts while the engine is running.
- Charging: If the alternator is working, battery voltage will be 13.5 Volts (or higher) with the engine running.
NOTE: To accomplish this test, the battery has to have enough of a charge to keep your Camry running for at least 5 to 10 minutes. So, if the battery is completely dead, charge it up.
These are the test steps:
- 1
Crank and start your Toyota Camry.
- 2
Select Volts DC mode on your multimeter.
- 3
Connect the red multimeter test lead to the positive (+) battery terminal.
- 4
Connect the black multimeter test lead to the negative (-) battery terminal.
- 5
Your multimeter is gonna' register one of two possible readings:
1.) A steady 13.5 to 14.5 Volts DC.
2.) Or 12.5 Volts that will decrease the longer the engine stays running. - 6
Put an electrical load on the alternator to further confirm that it's either charging or not charging.
This can be very easily done by turning on every accessory possible (inside the vehicle). Turn on the A/C or heater on high, turn on the windshield wipers, turn on the headlights, turn on everything and anything that uses electricity inside and outside of the vehicle. - 7
Your multimeter will show you one of two things (as you turn on all of this stuff):
1.) The multimeter will register a nice and steady 13.5 to 14.5 Volts DC no matter what gets turned on.
2.) It will register 12.5 Volts DC and this voltage will decrease more and more as you turn on stuff inside your Toyota vehicle.
OK, let's interpret your multimeter test results:
CASE 1: Your multimeter registered 13.5 to 14.5 Volts. This is the correct and expected test result.
This test result confirms that the alternator is working and charging the battery.
CASE 2: Your multimeter registered a voltage that steadily dropped down to 9 Volts. This is a clear indication that your Toyota Camry's alternator IS NOT charging the battery.
Replacing the alternator at this point usually solves around 90% of the no-charge conditions. To to be absolutely sure it is bad, go to: TEST 2: Checking The Continuity Of The Bat (+) Cable.