You can find the 1997-1998 ignition system wiring diagram here:
NOTE: The following tutorial will help you diagnose the Ignitor (ignition control module) in a step-by-step way: How To Test The Igniter -Step By Step (1995-1996 1.5L Toyota Tercel).
The following tutorials will help you test the ignition coils, and the CMP and CKP sensors:
- How To Test Ignition Coils (1995-1998 1.5L Toyota Tercel).
- How To Test The CMP Sensor (1995-1998 1.5L Toyota Tercel).
- How To Test The CKP Sensor (1995-1998 1.5L Toyota Tercel).
Ignitor Harness Connector Pin Out
| 1995-1996 1.5L Tercel Ignitor Connector | ||
|---|---|---|
| Pin | Wire Color | Description |
| 1 | Red with white stripe | IGC2 -2/3 Ignition coil control signal |
| 2 | Light green with black stripe | IGF -Ignition coil firing feedback |
| 3 | White with black stripe | GND -Chassis Ground |
| 4 | Blue with yellow stripe | IGT2 -Ignitor control signal cylinders 2/3 |
| 5 | Light green | IGT1 -Ignitor control signal cylinders 1/4 |
| 6 | Black with blue stripe | TACH -Tachometer signal |
| 7 | Black with orange stripe | +B -Battery power |
| 8 | Red | IGC1 -1/4 Ignition coil control signal |
NOTE: The Ignitor engine harness connector has female terminals.
If this info saved the day, buy me a beer!
